Lipo batteries often refer to the polymer lithium batteries. According to the electrolyte materials, Li-ion battery is divided into liquid lithium ion battery and polymer lithium battery or plastic lithium battery. Do you know what are the difference between li-ion and li-polymer battery? Let us review these common senses with Gens Ace.
The difference between li-ion and li-polymer battery
Compare with li-ion battery,lipolymer battery has the following characterizations:
1. It would not leak the electrolyte, since it uses the colloidal solid rather than the liquid electrolyte.
2. It can be made into thin battery. For example, a 3.6V 400mAh 15C battery can have the thickness of 0.5mm.
3. It can be designed into multiple shapes.
4. The battery can distort and be flexible. The macromolecule battery can distort up to 900 around.
5. It can be made into single high voltage: the battery with liquid electrolyte can only acquire the high voltage and macromolecule battery by putting several batteries in series.
6. Because the battery itself does not have liquid, it is possible to obtain high voltage by making multi-layer combination inside the single battery.
7. The capacity is twice as that of the Li-ion battery.
The factor influenced the lifespan is the charging cycle, and the times of charging will not directly influence the lifespan.
For example, the first day, we charge the battery after consumed half of the power, and the second day, we repeat that process. This is just one charging cycle rather than two. Therefore, a cycle may be finished by several times of charging. Every single charging cycle will reduce the power slightly. However, a superior battery can maintain 80% power after many charging cycles. That is why some lipo battery can use normally after two or three years. Certainly, it is also needed that we replace the lipo battery if the lifespan has ended.
The lifespan of lipo battery is commonly 300-500 charging cycle. We set the Q as the power provided by one-time fully discharging. Ignoring the reduction of every charging cycle, the lipo battery can power 300Q-500Q through its lifespan. Accordingly, if we charge the battery after consuming power, the battery could be charged for 600-1000 times. (if we charge the battery after consuming 1/3 power, the battery could be charged for 900-1500 times.) we cannot tell the exact number of charging times if we charge randomly. In a word, the total power 300Q-500Q is constant. Therefore, the lifespan is related to the total charging power rather than the charging times. Besides, the difference between the influence of deep charging and discharging and the influence of light charging and discharging to lipo’s lifespan is similar.
In fact, light charging and light discharging benefit more to the lipo battery. Only when the lipo battery is calibrated by the product has the need to charge and discharge battery deeply. Therefore, we can use the lipo battery for convenience and do not have to concern about the lifespan.
If the 11.1v lipo battery is used above the regulated temperature (over 35 degree centigrade), the power will continuously decrease, which means the flight time would not be so long. If charged under the high temperature, the battery would be further damaged. It is unavoidable that storing under the high temperature will hurt the battery’s quality.
If using below the 4 degree centigrade, you would also find the flight time of the battery has been reduced, and even some original lipo batteries of mobile phones cannot be charged. But, this situation is just temporary. Differ from using in the high temperature, once the temperature gets higher and the molecules inside the battery are heated, the battery would recover to the normal energy.
To maximize the performance of lipo battery, we should use it more often and make the electron flow. If we cannot use the lipo battery frequently, please remember to make a charging cycle and calibrate it (charge and discharge deeply) every month.